After install, reboot and remove detach acs.iso login: setup Enter hostname: acs Enter IP address: 10.0.20.86 Enter IP netmask: 255.255.255.0 Enter IP default gateway: 10.0.20.1 Enter default DNS domain: poc.com Enter primary nameserver: 8.8.8.8 Add seconday nameserver? Y/N N: Enter NTP : Add another NTP server? Y/N N: Enter system timezoneUTC: GMT Enable SSH service? Select “Use Intel VT-x/AMD-V for instruction set virtualization and Intel EPT/AMD RVI for MMU virtualization” -vm hardware version must be version 9 or above # vim-cmd vmsvc/getallvms # vim-cmd vmsvc/upgrade unetlab-vmid vmx-09 -modify /etc/vmware/config add in the last line then logout and relogin from web gui vhv.enable = “TRUE” or better modify /vmfs/volume/datastore1/UnetLab/UnetLab.vmx add to the last line vhv.enable = “TRUE”. 3 – VT/AMD-V indicates that VT or AMD-V is enabled in the BIOS and can be used.Edit the VM settings and go to VM settings Options CPUID mask Advanced Level 1, add the following CPU mask level ECX - –H- NOTE: do above only if all else failed -Edit the VM settings and go to VM settings Options CPU/MMU Virtualization. 2 – VT/AMD-V indicates that VT or AMD-V is available but is currently not enabled in the BIOS.